Electronic RFID warehouse material positioning system architecture,NFC Admission Ticket manufacturer

　　Electronic RFID warehouse material positioning system architecture

　　We will install a semi-active RFID low-frequency activation electronic tag TY-T602A developed and produced by Tangyuan Company on each material that needs to be located and monitored, or a sound and light search alarm tag TY-T607A, the tag With a unique code, each tag is initially bound to the corresponding material. The tag usually sleeps and does not send a signal to the outside world. Only when it is within the trigger signal range and is awakened by the low-frequency activation locator, will it send a signal to the outside world; secondly, we A low-frequency activation locator (model: TY-A201A) is installed at the entrance and exit of the warehouse and the main aisle to wake up the label and locate the position of the label. The distance between the wake-up label is 0.5-8 meters; at the same time, install some in different places of the warehouse Active RFID long-distance reader (model: TY-R301A), used to collect the information sent out after the low-frequency activation electronic tag is activated (including the ID number of the electronic tag itself, the address code of the low-frequency activation antenna, the signal strength RSSI value and Label battery power status light information). After the reader collects the data, it uploads the information to the computer management center through various transmission methods. The management center has a set of software systems that we specialize in the location and management of warehouse materials. The data is analyzed, processed, stored, judged, etc., so as to complete the functions of the entire warehouse material positioning and dispatching management system; Moreover, we can also use software to let the reader call the corresponding label of a certain material, which can make the label emit sound and light. To find related materials; in addition, the monitoring equipment of our warehouse access control can have the anti-theft alarm function.

　　System function introduction

　　1) Material warehousing management:

　　Install a set of low-frequency activator and long-distance reader at each entrance of the warehouse. The activator has 2 antennas, No. 1 and No. 2, respectively, placed inside and outside the doorway, so that it can be monitored anytime and anywhere. The movement of materials in and out of the warehouse, including time, location, and detailed information about materials.

　　2) Staff attendance management:

　　At the same time, an electronic label can also be issued to related staff, which can be used to monitor staff attendance and activity trajectory, and control the flow of personnel at any time.

　　3) Sound and light search:

　　Warehouse management personnel can search for the label corresponding to a certain material through the computer management system software, and make the label emit sound and light, which is convenient for finding the article quickly.

　　4) Material warehouse positioning:

　　Through this system, the approximate location of each material can be located at any time, which can be accurate to the position of 5 meters around, and the specific location of each material and item can be controlled at any time.

　　6) Historical data query:

　　There can be monthly reports and other data, as well as statistics and historical data query on the in and out of various materials.

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

Introduction to the working principle of RFID.dog microchip maker

What are the advantages of UHF RFID electronic tags? Mainly in three aspects!Pet Tag Sale