Hospital bed disinfection RFID management design plan, RFID Silicone Wristband manufacturer

　　Design scheme of RFID management information system for hospital bed disinfection

　　1. The meaning of system application

　　In order to prevent and control infections in the hospital, cut off the route of transmission, and avoid cross-infection of patients during hospitalization, disinfection and isolation is an important part of clinical work. The application of the bed disinfection RFID management information system can thoroughly monitor the terminal disinfection procedure of the hospital bed unit, which greatly reduces the labor intensity of the nursing staff, and fundamentally solves the defect of the imperfect bed disinfection process. This system is widely used in hospitals, which not only reduces the cost of disinfection and isolation in hospitals, but also has great significance for the prevention and treatment of clinical infectious diseases. It also allows patients to get rid of the worry of cross-infection in the hospital, so that they can be hospitalized and treated with peace of mind. Social and economic benefits.

　　2. System workflow

　　1. Hospital bed application: The ward nurse applies for bed replacement online, indicating the application ward, bed number, application time, applicant, and using the call sign system to indicate clearly.

　　2. Send and receive: After receiving the information, the bed disinfection distribution center will indicate the delivery time on the computer, send the staff, and immediately assign the dispatch staff to send the spare bed to the applied ward via the elevator, and the nurse on duty After the acceptance of the bed and the bedding are complete and complete, sign and sign the time. The delivery personnel will inspect the recycling bed and put on the complete supplies and send the bed to the contaminated area of the disinfection center through the recycling elevator.

　　3. Cleaning and disinfection: the operators in the contaminated area will perform classification treatment after acceptance, put duvet covers, bed sheets, and pillowcases in dirt bags for recycling in the laundry room, and put mattresses, cotton wool, mattresses, and pillows in a pressure steam sterilizer After being disinfected at 1050C for 5 minutes, put it into the cleaning area; the hospital bed is pushed into the disinfection washer, and it is cleaned and disinfected for 12 minutes. After treatment, it is put into the cleaning area. Sheets, sheets, and pillowcases are cleaned and disinfected in the laundry room and sent to the cleaning area. The personnel in the cleaning area shall carry out acceptance inspection and sign.

　　4. Acceptance package: the cleaning staff will check and accept hospital beds, sheets, cotton wadding, mattresses, pillows, sheets, sheets, pillowcases and quilts. After qualified, make spare beds and store them in the clean area for later use. Return unqualified quilts in time The laundry room is repaired and returned to the clean area after repair. The bedclothes that cannot be repaired and the heavily contaminated cotton wool, mattresses, and pillows are replaced by the bedclothes center. The unqualified hospital beds shall be promptly reported to the equipment repair station for repairs.

　　5. Spare storage: The recovered hospital beds shall be cleaned and disinfected in time every day, and the supporting facilities shall be checked and accepted. After finishing, they shall be stored in the clean area for later use.

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

Introduction to the working principle of RFID.dog microchip maker

What are the advantages of UHF RFID electronic tags? Mainly in three aspects!Pet Tag Sale