How to connect and use high-frequency readers!Chip Bracelet factory

　　How to connect and use high-frequency readers

　　The operation of high-frequency readers is not difficult, but no matter how simple things are, people who operate for the first time will be helpless.

　　1. Device connection

　　1. Connect the USB cable of the reader device to the host interface of the PC through the USB communication interface, and then wait for the computer to automatically download the channel, and then check whether the device is recognized.

　　2. Through the RS232 communication interface, directly use the serial communication cable of the reader device to connect with the computer interface, and then check whether the device is recognized.

　　Second, connect to the power supply

　　After the reader device is normally connected to the power supply, the red light flashes, indicating that the device is operating normally; if the green light is on, it indicates that the device has detected an electronic tag or card.

　　Three, parameter settings

　　After successfully connecting the reader device, press the power switch, check that the indicator light is normal, open the client test tool R-Tool, and click the recognized reader device. The successfully connected device will display its own software, hardware, serial number and other related parameters and information, and return correct information.

　　Four, card reading operation

　　The R-Tool can be used to read the card information from the recognized device. There are 3 card types supported: IS015693, ISO14443A and multi-protocol card readers. After the operation is successful, the message box will return the correct information, otherwise, an error message will be returned.

　　Five, write operation

　　Perform repeated write test operations on the reader device through R-Tool, select the tag model that is consistent with the device, and unfold the multiple options of all operation functions of the tag. Select one or more label functions to be operated, such as write data fast, write DSFID, etc.

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

Introduction to the working principle of RFID.dog microchip maker

What are the advantages of UHF RFID electronic tags? Mainly in three aspects!Pet Tag Sale