How to remove the ETC label?High Frequency RFID Wristband Production

　　How to remove the ETC label?

　　The ETC electronic tag is bound to the vehicle and has an anti-disassembly device. If you do not know the principle and remove it at will, the electronic tag will be locked.

　　How to remove the ETC label?

　　The ETC electronic label may sound like you don’t know what it is. In fact, it is the data reading and transmission device in the picture above. Once installed, it is not allowed to be disassembled. This function is realized by the button in the middle of the double-sided tape on the back of the electronic label. The picture is called the anti-tamper guide bar, which is actually a switch. After handling the ETC electronic label, the staff will stick it on the windshield for you on the spot. After you put it on, the anti-tamper switch will be pressed down by the windshield. This switch will pop up after removal, and then the electronic tag will be locked and cannot be used. At this time, you need to go to the service outlet to unlock it.

　　How to remove the ETC label?

　　If you really want to remove it, there is no way. You can press the electronic label firmly, then use a wallpaper knife to cut the adhesive surface of the double-sided tape and the windshield, and then use the blade to press the switch to slowly remove it. After removing it You can use 502 glue to stick the switch so that there is no problem.

　　How to remove the ETC label?

　　Back then, my uncle and I went to the bank to install ETC. Because in the city center, we drove my uncle’s car. After it was done, they said that they would install it on site. Press the tamper switch in, tear the printing paper and fill it around the tamper switch, plug it tightly, and then use 502 to enter it. This switch can't be played anymore. Then the staff activated it for me, and after taking it back, I threw it on the center console for more than half a year, but it didn't stick to the windshield. Later, I was afraid of losing it or sticking it on.

　　How to remove the ETC label?

　　But then again, if you think the installation location is not suitable, you can try to disassemble it yourself, which is convenient. But if you want to use it on other cars, I don’t think you should do it. Above the ETC lane is a signal communication device, and there is a license plate recognition camera in front. If you install other cars on the front system, you will find that the label is inconsistent with the vehicle. You still use Nothing.

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

Introduction to the working principle of RFID.dog microchip maker

What are the advantages of UHF RFID electronic tags? Mainly in three aspects!Pet Tag Sale