Electronic ear Tag Dealer

News

RFID Workflow

source:Industry News Popular:rfid fpc tag release time:2022-09-08 09:06:20 Article author:yu

  RFID Workflow

  ① The reader sends a certain frequency of radio frequency signals through the transmitting antenna.

  ② When the electronic tag enters the working area of the reader antenna, the electronic tag antenna generates enough induced current, and the electronic tag gets energy and is activated.

  ③The electronic tag sends its own information through the built-in antenna.

  ④The reader antenna receives the carrier signal sent from the electronic tag.

  ⑤ The reader antenna transmits the carrier signal to the reader.

  ⑥ The reader demodulates and decodes the received signal, and then sends it to the upper layer of the system for related processing.

  ⑦ The high level of the system judges the legality of the electronic label according to the logic operation.

  ⑧ The high level of the system makes corresponding processing for different settings, sends out command signals, and controls the action of the actuator


Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

Introduction to the working principle of RFID.dog microchip maker

What are the advantages of UHF RFID electronic tags? Mainly in three aspects!Pet Tag Sale

Previous : Common Communication Interfaces in RFID Devices Next : How NFC works and three basic types of applications

Popular recommended products

Related Products

Related Information

Creative, organized, responsible, enthusiastic

contact us