RFID computer room equipment management solution,Animal Microchip

　　RFID computer room equipment management solution

　　1. System introduction

　　For businesses, the management of important fixed assets has always been a headache. Inventory of accounts; clear view of important asset configuration parameters; master the operation and maintenance of important assets. How to accurately and quickly grasp the relevant information is the problem to be solved by this system.

　　RFID computer room equipment management solution

　　RFID is a radio frequency identification technology, which consists of a reader, an antenna and a tag. When the tag is close to the sensing range composed of the reader and the antenna, the tag will send the data stored in the chip to the reader, and the reader will upload the data to the information system.

　　Due to the advantages of RFID's large amount of stored data, fast reading speed, and no need for human intervention in the process of reading data, rapid asset identification and inventory can be performed. Realize accurate and rapid grasp of important fixed asset information.

　　This system consists of: electronic tags, fixed reading and writing equipment for on-site inventory, RFID handheld reading and writing equipment, multi-antenna branch antenna, control computer and system management software, etc.

　　2. System Architecture

　　The system hardware architecture includes: fixed reader, antenna, RFID handheld device, tag and backend server;

　　Data exchange method: It can be implemented in two ways, choose one according to the cost requirements:

　　1) Online data exchange, real-time transmission of field data back to the background information system through a fixed reader for processing and analysis;

　　2) Offline data exchange, after collecting data on site through handheld devices, import it into the background information system for processing and analysis;

　　The overall system architecture is: Multi-tire C/S combined with Browser/Web Server/DB Server.

　　RFID computer room equipment management solution

　　3. Business operation process

　　1. Encode the cabinets in the computer room, enter the encoded information into the system and RFID tags, and fix the RFID tags on the cabinets.

　　2. Encode the server, enter the encoded information into the system and the RFID tag, and fix the RFID tag on the server.

　　3. Arrange antennas and readers in the cabinet according to the requirements of reading the label range.

　　RFID computer room equipment management solution

　　Fourth, the server enters the computer room process

　　After querying the location of the system server placed in the cabinet in the computer room, a list of warehousing operations will be produced. At a minimum, the job list should include information such as cabinet number and server number. The operation and maintenance personnel transport the server to the designated computer room according to the requirements of the job list, and the on-duty personnel in the computer room confirm the warehousing operation through the warehousing work order generated by the RFID handheld computer. After the operation and maintenance personnel put the server in the designated location according to the requirements of the warehousing job list, they scan the cabinet number and server number through the RFID handheld to confirm that the operation is correct and complete the warehousing job list. The staff on duty in the computer room confirms the cabinet number, server number and server location through the RFID handset to complete the warehousing work order.

　　RFID computer room equipment management solution

　　5. Inventory process of computer room

　　The person on duty in the computer room opens the system inventory interface and imports the inventory information to the RFID handheld. The on-duty personnel first read the RFID tag of the cabinet to confirm, and then read the server tags in the cabinet in turn. If the label data read in the cabinet is consistent with the inventory data imported to the handheld, the interface will be green, indicating that it is passed. If the interface of the handheld is inconsistent, the red interface is displayed, indicating that it is not passed, and you can choose to re-inventory or pending inspection to end the inventory. Finally, the data after the inventory is imported into the system.

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

RFID management and control scheme of property involved,RFID Tags

RFID material receiving and dispatching management system solution,RFID Seal