RFID devices, never terminate, come and participate!RFID Microchip Dealer

　　At present, problems such as low extracurricular reading, less reading of classic books, and fragmented reading are common in the education of universities, middle schools and primary schools. However, the number of books in primary and secondary schools is not large, and many schools have dedicated libraries and library rooms. However, there are obvious shortcomings in the resource utilization rate of primary and secondary school libraries. After investigation and analysis, we found that in addition to the high learning pressure of students, the most important problems are:

　　1. Complex borrowing and returning procedures and harsh borrowing and returning restrictions;

　　2. The library is far away from the classroom, which makes it difficult to borrow or return;

　　3. It is impossible to form a learning atmosphere in which students compete to borrow and read.

　　According to reports, on an annual basis, the average person in South Korea reads 7 books, the average person reads 40 books in Japan, 55 books per person in Russia, 64 books per person in Israel, and only 0.7 books per person in my country. This is a number worthy of serious consideration. !

　　Therefore, for the above reasons, there is an intelligent library management system based on rfid equipment. First, we put the books into the management terminal and distribute them in every classroom or other environment of the school, so that the process of students borrowing and returning books is fully automated. , At the same time, content data such as the time of borrowing and returning books, the content of borrowing, and the number of readings are automatically recorded into the self-learning management system. At the same time, complete a little borrowing and return more points. Automate the entire borrowing and returning process. The digital distributed autonomous learning system is a national patent product, and its software has obtained the national software copyright. According to the characteristics of people's traditional bookshelves, the product uses rfid equipment to fundamentally solve the problems of people borrowing and returning books, as well as data statistics, analysis, book demand, and information release. The specific process has the following steps:

　　1. First put the books with RFID electronic tags into the library (enter them into the database of the bookcase) for processing;

　　2. When the door of the bookcase is opened, the UHF rfid reader/writer starts to work through the trigger mode, and the rfid reader/writer periodically sends signals through the radio frequency antenna to identify the electronic tag;

　　3. When a book with an electronic label passes through the door of the cabinet, the label data will be collected by the radio frequency antenna and the signed data will be uploaded to the smart bookcase management system through the network port;

　　4. At this time, the system will display the books in and out of the bookcase, so as to achieve the purpose of statistics and management.

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack