RFID mold management system,MIFARE RFID Wristband manufacturer

　　RFID mold management system

　　Traditional mold management uses paper to register mold numbers and position numbers, which can easily cause registration errors, loss of records, management confusion, and extremely inconvenient search. This system uses RFID Internet of Things application technology to realize fast storage and storage management; through the back-end database, realizes quick search for molds; scientific and systematic management of molds.

　　This system has the following advantages:

　　The RFID electronic tag is attached to the mold, which is stable, safe and reliable;

　　Systematic coding and identification through RFID electronic tags, realizing quick access to and storage of molds and inventory management;

　　can specify the mold for quick search operation;

　　The real-time record database system for each use and maintenance of the mold.

　　RFID mold system workflow

　　1. RFID tag writing information and installation

　　Write information: The tags use ultra-high frequency anti-metal tags (CMC351), each tag is assigned a unique ID number, which corresponds to the mold one-to-one, and writes the mold information into the chip, including: mold number, production date, mold location, Upload the database for mold types, processing materials, repairs, maintenance, etc.;

　　Installation: The label surface is made of high-strength engineering plastics, which is resistant to compression and impact. Install an anti-metal label on each of the four sides of the mold.

　　2. Mold warehousing management

　　Storage: Read the anti-metal tag (CMC351) of the mold through the UHF antenna (CMC330), the active RFID reader (CMC191) automatically reads the elevator tag (CMC362) of the mold rack, and the system automatically binds the mold position , Upload data to the back-end database through the industrial computer (CMC812A) to realize fast storage;

　　Outgoing: read the anti-metal tag (CMC351) of the mold through the UHF antenna (CMC330), the active RFID reader (CMC191) automatically reads the elevator tag (CMC362) of the mold rack, and the system automatically releases the mold position. Upload data to the back-end database through an industrial computer (CMC812A) to achieve fast delivery;

　　Inventory: Through the database system, timely query the inventory of molds and understand the mold inventory.

　　3. Mold query management

　　RFID mold management system

　　Query: Enter the mold number to be searched in the system, and the system queries the elevator tag (CMC362), and its corresponding identification position, so as to realize the quick search of the mold.

　　4. Mold repair and maintenance management

　　Repair and maintenance: In daily repair and maintenance, the repair and maintenance records are entered in time through the handheld reader (CMC165) and uploaded to the database system through the wireless module in time. Through the real-time recording of the mold's use and maintenance conditions to the database system, it helps the management analyze the reasons for the loss of the mold and evaluate the life of the mold.

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

Introduction to the working principle of RFID.dog microchip maker

What are the advantages of UHF RFID electronic tags? Mainly in three aspects!Pet Tag Sale