RFID reader and antenna installation,UHF Cards RFID manufacturer

　　RFID reader and antenna installation

　　The most basic RFID system consists of three parts: Tag: consists of coupling elements and chips, each tag has a unique electronic code, attached to the object to identify the target object; Reader: read (sometimes also The device that can write tag information can be designed as a handheld or fixed type; Antenna: Transmit radio frequency signals between the tag and the reader. The basic working principle of RFID technology is not complicated: after the tag enters the magnetic field, it receives the radio frequency signal from the reader, and uses the energy obtained by the induced current to send out the product information stored in the chip (Passive Tag, passive tag or passive tag) , Or actively send a signal of a certain frequency (Active Tag, active tag or active tag); after the reader reads the information and decodes it, it is sent to the central information system for relevant data processing.

　　Install card readers and antennas on the inside and outside of the warehouse door or on both sides of the door. The antennas illuminate the inside and outside areas of the door respectively. The position of the reader and the height of the antenna are adjustable. , In order to be suitable for various specific environmental applications, staff wear RFID tags, hang the tags on their chests and enter the gate of the warehouse, and they can be read by the RFID reader and uploaded to the computer system records. The card reader reads that if a worker takes out an item from the warehouse, the RFID tag attached to the item will also be read by the RFID reader, so that both data are uploaded to the computer system at the same time, and the system will show something A person takes an item from the warehouse. Achieve accurate, fast, and automatic barrier-free inspection of personnel entering and exiting important passages.

　　Long-distance intelligent identification-the system uses radio frequency identification technology, internal employees and outsiders do not need to swipe their cards, once they pass the warehouse door, the system automatically completes the personal identity security inspection and verification and keeps inspection records;

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

Introduction to the working principle of RFID.dog microchip maker

What are the advantages of UHF RFID electronic tags? Mainly in three aspects!Pet Tag Sale