RFID technology helps comprehensive treatment of hazardous waste

　　The rapid development of RFID technology has brought new breakthroughs to the improvement of hazardous waste information management technology. The introduction and use of existing mature RFID technology in the original hazardous waste information system makes it possible to transform planar management into three-dimensional management, and realize the system It provides a basis for monitoring and management of automated, standardized, and informatized operating procedures.

　　On the basis of digitization and information management, the level of information management of hazardous waste is maximized, the comprehensive processing capacity of hazardous waste is improved, and potential safety hazards are avoided.

　　After receiving the hazardous waste, the hazardous waste treatment center shall correspond to the receiving list, clarify the details of the received items, and check whether the packaging is sealed and leak-free, whether there is a label attached and fill in the specifications. After confirming that it is correct, the background system will print a barcode label based on the hazardous waste information and paste it on the hazardous product. The hazardous waste will then be loaded onto the pallet and wait for storage.

　　Trays with RFID chips implanted in advance will be associated with dangerous goods information at this link. The staff use handheld devices to scan the dangerous goods barcodes and pallet RFID tags, associate the two information and upload them to the background database. The background system generates tasks to be stored in the warehouse, and at the same time sends the tasks to the smart forklift.

　　The intelligent forklift consists of a forklift industrial computer terminal and RFID scanning equipment. The forklift industrial control computer can directly receive the warehousing tasks issued by the background system, and guide the forklift driver to the designated loading and unloading point for dangerous goods shipment.

　　When the forklift arrives at the loading and unloading point to load the dangerous goods, the RFID scanning device on the forklift will read the pallet label information, and by querying the background data system, the information of the dangerous goods being transferred will be clarified and transported to the designated warehouse and The designated placement area.

　　Install location electronic tags at the entrance to the warehouse. When the forklift enters the warehouse, the forklift RFID scans the location label information and will first match the warehouse information. If it is a warehouse, it will guide the forklift driver to the designated location; if it is not a corresponding warehouse , Will give a timely warning to remind the forklift driver to go to the correct warehouse location.

　　After the forklift driver arrives at the guided shelf, it will unload. During the unloading process, the forklift RFID scans the shelf location label and checks whether the shelf information is correct. If it is normal, the storage operation will be completed and the information will be fed back to the background to update the inventory information in time; If it is not correct, an alarm will be issued to guide the forklift driver to the designated shelf location.

　　Through the application of RFID in the warehousing link, it will help the hazardous waste treatment center to strictly store dangerous goods by category, one item for one item, improve storage efficiency, avoid misplacement and misplacement caused by human error, and maximize the protection of dangerous goods storage Safety.

　　The pretreatment of dangerous goods after leaving the warehouse also needs to be operated strictly in accordance with the relevant operating procedures. The methods and steps for handling different dangerous goods are different, and avoiding wrong handling is also the top priority.

　　Install location tags in each pretreatment center, and the location tags are bound to pretreatment process information. Forklifts carry out dangerous goods out of the warehouse. Firstly, the dangerous goods information will be determined by the electronic label information of the pallets loaded with dangerous goods, and the outgoing list will be checked. After confirmation, the system prompts to go to the designated pretreatment center. After the forklift reaches the preprocessing center according to the guidance, the scanning device on the forklift will first scan the location tag of the preprocessing center and check whether it is correct. If it is correct, it will prompt the forklift driver to carry out the exit, otherwise it will alarm. All processing information will be uploaded to the background system in time, alarm information will be archived, and reports will be provided on demand.

　　In view of the characteristics of hazardous waste information management and the hidden safety hazards in the traditional management mode, the introduction of RFID technology will make full use of its characteristics of information identification, remote identification, and strong environmental tolerance, and build a hazardous waste information management system on this basis , To realize the automation, informationization, high efficiency, standardization and refinement of the management of dangerous goods in and out of the warehouse, thereby improving the concentration, efficiency and safety of hazardous waste disposal, and effectively reducing the pressure of manual management.

Read recommendations:

M04 ISO11784/5 Animal Microchip Implant

M03 ICAR Certifiicated Injected Under Skin Microchip

M02- Pet Microchip with Needle Pack

Introduction to the working principle of RFID.dog microchip maker

What are the advantages of UHF RFID electronic tags? Mainly in three aspects!Pet Tag Sale